Applying Your Vinyl Graphic with Rapid Tac Application Solution

1. Thoroughly clean panels with RAPID TAC and paper towel. Do not use other cleaners or solvents, nor cloth towels or commercial paper towels.

2. Spray panels again with RAPID TAC. Pell backing off decal and place on wet panel. You may also spray adhesive side of decal.

3. Align decal. Use the squeegee to remove fluid, using a good deal of pressure and working from the center out toward the edges in all directions.

4. Wait 2-3 minutes. If decal has cover tape, saturate it with RAPID TAC, then remove the tape. Wipe with paper towel and your application is complete.